Mantenir el motor foraborda d'aquesta manera pot allargar la vida útil del vaixell d'aliatge d'alumini

If you own an aluminum alloy boat of your own, but because it is not frequently used, then everyone must maintain the servers on the aluminum alloy boat. The actual maintenance method is as follows: clean the engine surface with cold water and completely clean the cooling system . Let the water drain completely. Wipe off all surface water with an oily cloth. Drain all the fuel from the fuel pipe, fuel cock and carburetor and remove the parts inside the stainless steel screen including the fuel cock. Disassemble the carburetor, remove all the internal dust, and use car gasoline and air compression to remove it. Remove the ignition coil and add engine oil or anti-rust oil for storage according to the ignition coil space. Drive the recoil starter rocker many times to make the car's oil circulation system to the internal parts. Rub grease on the propeller shaft of the aircraft. Remove and replace the oil in the gearbox. Rub lubricating grease on all drag parts, anchor bolts and nuts. Use a dry rag to wipe off all the water and salt on the aluminum alloy boat household appliances parts.